RLU400 Lift Controller

Monitor your floor access rights and effectively configure them in real-time with the unique access control software, UNIPASS. Seek and approve access to common floors and to those restricted, ensuring better control for lift management. Applying the latest standards to ensure optimised and secured communication with RFID reader (OSDP and SSCP) and Unipass (AES and TLS encryption), RLU400 easily adapts to your changing needs, even remotely.

Product Benefits

• Autonomous lift access control
• Automatic transfer of events to the server
• Enhanced memory capacity: up to 200.000 ID media (key fobs & cards) and 30.000 events
• Scheduled automatic floor opening and closing
• Fire control function to allow emergency evacuation
• Integrated Ethernet network module and possibility to enable AES Encryption (Unipass 6.6.3+) or encryption using TLS certificates (Unipass 8+)
• Remote connection to the controller possible via the network (firmware upgrades, configurating OSDP/SSCP readers)

Technical Specifications:

• Hardware:
  Version: UT 4
  Dimensions (L x H x D):
• Housing:
  12 V: 300 x 300 x 80 mm
  230 V: 450 x 300 x 80 mm
• Weight
  Housing:
  12 V: ≃2.5 kg
  230 V: ≃4.2 kg (battery not included)
  DIN: 369 g
  Board: 199 g
  Conformity: CE
  Available options: Backup power supply (BPS), I/O module
  Related products: RFID reader
• Electrical
  Input voltage: 12 V DC (+20 %/-10 %)
  100 V to 240 V AC (50-60 Hz) for 230 V configurations
  Typical power consumption: 800 mA at 12 V DC (excluding peripherals)
  Power failure protection: ≃5 years of data retention : The intern clock keeps working for approximately one week in case of power outage and communication failure.

Communication

• Server/Network connectivity: RJ45 ethernet 10 Base-T or 100 Base-TX (auto-sensing)
• Communication security: AES (Unipass 6.6.3+) & TLS (Unipass 8+)
• Reader connectivity :1 reader (Wiegand, OSDP or SSCP)
  2 LEDs and 1 beeper / reader
• Reader compatibility: All IDtech readers and most third-party readers
  QR-code, biometric, licence plate, and long-distance readers
• Identification technologies: iClass®, Seos™, MIFARE® Classic, DESFire®EV1/EV2/EV3.
• Communication protocols: Wiegand, OSDP and SSCP
• Max. wiring distance: The reader must be installed in the lift cabin.
• Door opening time :12 inputs and 8 outputs
• In option: additional I/O module with 8 inputs and 4 outputs
• I/O: RJ45 ethernet 10 Base-T or 100 Base-TX (auto-sensing)

Environment
Mounting: Wall mount, DIN-rail
Operating temperature: 0 to 60 °C

Recommendations
Technical recommendations:

• There is no restriction on the number of lift controllers in the same access control system.
• Not compatible with lifts with a destination control system
• Floor contacts are available to the lift manufacturer.

Wiring recommendations:

• Wiring between the elevator and the IDtech lift controller, including the installation of a badge reader in the lift cabin, shall be installed by the lift installer according to IDtech specifications.
• Power supply: 12 V – 2×2.5 mm2 LIYY / VTMB; 230 V – XVB 3G1.5 mm2
• I/O module: 2×0.75 mm2 + 2x2x0.22 mm2 twisted alarm cable
• Wiegand: 2×0.75 mm2 + 6×0.22 mm2 shielded alarm cable
• OSDP: 2×0.75 mm2 + 2x2x0.22 mm2 twisted alarm cable